T&S Trip Hoppers

Range Cattle Feeders

Go bulk with your feeding and save $$$.
Know the exact amount of feed your are feeding.
Take the labor out of your feeding and save time.
Feed cubes any size or alfalfa hay cubes.

T&S Trip Hopper Jr.

The T&S Trip Hopper Jr. is 30″ Long, 24″ Wide, and 30″ Tall

It holds 300 lbs. of 3/4″ cubes and can do everything the larger Trip Hoppers do.

T&S Trip Hopper Truck Model

These truck model feeders may be mounted in the back of a pickup, or they can be mounted across a flatbed. All of these feeders work the same way. The trailer is powered by the small wheel being engaged against the ground wheel. The truck model feeder is powered by a 12 volt motor that runs off the truck battery. These are not starter motors. These 12 volt motors are Constant Duty and are C-Face bolted to an oil bath gear reducer. They run for power and not speed. All wiring, switch and the complete counter assembly come with each feeder.

Available Sizes:
750 lbs capacity – 24″x72″x40″ (w/l/h)
100 lbs capacity – 24″x72″x46″ (w/l/h)
1250 lbs capacity – 24″x72″x52″ (w/l/h)
1500 lbs capacity – 36″x72″x46″ (w/l/h)
2000 lbs capacity – 42″x72″x52″ (w/l/h)

T&S Trip Hopper Trailer Model

Completely self-contained, the trailer model feeders hold 3000 lbs. of 3/4 inch cubes. These feeders will feed in piles at 10 ft. intervals of in a steady trail of feed. You can set the feeder to dump from 2 to 8 lbs. per pile. These feeders are capable of handling cubes, any size, ground feed of any combination thereof. The feeder is very accurate, so why guess at how much you feed. The feeders are made of heavy gauge steel and have a 2 inch ball hitch with bulldog jack. They come equipped with 8 ply nylon 15 inch flotation tires.

3000 lbs capacity – 60″x72″x84″ (w/l/h)

T&S Trip Hoppers

Range Cattle Feeders

T&S Trip Hopper Jr.

T&S Trip Hopper Truck Model

T&S Trip Hopper Trailer Model

Centex Direct Wholesale

Site Map

THANK YOU!